Acer Aspire 1203XV (1200 series)

I use Red Hat 7.2 (2.4.9-31 kernel), and it fully
supports everything I need, everything is ok, btw
I didn't check usb, and other ports like IEEE 1394, S-video jack...
but now I don't need them, if you use them successfully, let me
know. <nembokid@olografix.org>

->> Modem
For Lucent Winmodem, you need ltmodem
modules, you can find them at:

http://www.heby.de/ltmodem
(If you have a red hat too:
http://www.sfu.ca/~cth/ltmodem/dists/redhat/current/)

I used kppp successfully.

->> Video
For graphics I used Xconfigurator, those settings worked for me:
S3 Savage Pro4+ -> Custom -> Monitor that can do 1280x1024 @ 74mhz ->
50-90 Hz.

->> Sound
sndconfig automatically found a VIA AC97 Audio Controller.

->> Notebook Specs

My dmesg:

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000005ef0000 (usable)
 BIOS-e820: 0000000005ef0000 - 0000000005eff000 (ACPI data)
 BIOS-e820: 0000000005eff000 - 0000000005f00000 (ACPI NVS)
 BIOS-e820: 0000000005f00000 - 0000000006000000 (usable)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 24576
zone(0): 4096 pages.
zone(1): 20480 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
Detected 1293.208 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2582.11 BogoMIPS
Memory: 93232k/98304k available (1269k kernel code, 3976k reserved, 90k data, 220k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU                1300MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd80e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Found IRQ 10 for device 00:04.0
PCI: Sharing IRQ 10 with 01:00.0
PCI: Found IRQ 11 for device 00:04.1
IRQ routing conflict for 00:07.5, have irq 5, want irq 11
IRQ routing conflict for 00:0d.0, have irq 5, want irq 11
PCI: Sharing IRQ 11 with 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Real Time Clock Driver v1.10d
block: queued sectors max/low 61786kB/20595kB, 192 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N020ATCS04-0, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS=2432/255/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
 hda: hda1 hda2 hda3 hda4 < >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 323k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 220k freed
Adding Swap: 514072k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:36:49 Sep  6 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:07.2 (0010 -> 0011)
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x1020, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,2), internal journal
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x00
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
ip_conntrack (768 buckets, 6144 max)
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)
PCI: Enabling device 00:11.0 (0012 -> 0013)
PCI: Found IRQ 11 for device 00:11.0
PCI: Sharing IRQ 11 with 00:04.1
IRQ routing conflict for 00:07.5, have irq 5, want irq 11
IRQ routing conflict for 00:0d.0, have irq 5, want irq 11
eth0: ADMtek Comet rev 17 at 0xc68adc00, 00:90:96:23:77:47, IRQ 11.
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 00:04.0
PCI: Sharing IRQ 10 with 01:00.0
PCI: Found IRQ 11 for device 00:04.1
IRQ routing conflict for 00:07.5, have irq 5, want irq 11
IRQ routing conflict for 00:0d.0, have irq 5, want irq 11
PCI: Sharing IRQ 11 with 00:11.0
Yenta IRQ list 0218, PCI irq10
Socket status: 30000006
Yenta IRQ list 0218, PCI irq11
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
Via 686a audio driver 1.1.14b
PCI: Found IRQ 11 for device 00:07.5
PCI: Sharing IRQ 11 with 00:04.1
IRQ routing conflict for 00:07.5, have irq 5, want irq 11
IRQ routing conflict for 00:0d.0, have irq 5, want irq 11
PCI: Sharing IRQ 11 with 00:11.0
ac97_codec: AC97 Audio codec, id: 0x4352:0x5934 (Cirrus Logic CS4299 rev D)
via82cxxx: board #1 at 0x1400, IRQ 5
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
ide-floppy driver 0.97
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12

enjoy!